Whirlpool Under Sink Water Filter Replacement

If you have a Whirlpool under sink water filter, you will need to replace the filter every 6 months to ensure that you are getting the cleanest possible water. Replacing the filter is a quick and easy process that can be done in just a few minutes.

Tools and Materials You Will Need

Before you begin, you will need to gather the following tools and materials:

New Whirlpool under sink water filter
Wrench
Bucket
Towel

Step-by-Step Instructions

Once you have gathered the necessary tools and materials, you can follow these step-by-step instructions to replace the filter:

Turn off the water supply to the filter. There will be a shut-off valve located under the sink. Turn the valve clockwise to turn off the water.
Open the filter housing. There will be a small door or lid on the side of the filter housing. Open the door or lid.
Remove the old filter. Grip the old filter and turn it counterclockwise to remove it from the housing.
Insert the new filter. Take the new filter and insert it into the housing. Turn the filter clockwise to tighten it into place.
Close the filter housing. Once the new filter is in place, close the door or lid of the filter housing.
Turn on the water supply to the filter. Turn the shut-off valve counterclockwise to turn the water back on.
Check for leaks. Once the water is turned on, check for any leaks around the filter housing. If you see any leaks, tighten the filter further.

Tips

Here are a few tips to help you replace your Whirlpool under sink water filter:

Make sure that you have the correct filter for your Whirlpool water filter system.
Replace the filter every 6 months to ensure that you are getting the cleanest possible water.
If you have any questions or concerns, please consult your Whirlpool owner's manual or contact a qualified plumber.