Remove Stopper From Bathroom Sink

A bathroom sink stopper is a small device that is used to plug the drain hole in a sink. Stoppers are typically made of rubber or plastic, and they can be either round or square. The stopper is inserted into the drain hole and then pushed down to create a seal. This prevents water from draining out of the sink. If you need to remove the stopper from your bathroom sink, there are a few different ways to do it.

Using a Pliers

One way to remove a stopper from a bathroom sink is to use a pair of pliers. The pliers can be used to grip the stopper and then pull it out of the drain hole.

Insert the tips of the pliers into the gap between the stopper and the sink.
Grip the stopper with the pliers and pull it straight up.
If the stopper is stuck, you may need to twist the pliers back and forth while pulling up.

Using a Screwdriver

Another way to remove a stopper from a bathroom sink is to use a screwdriver. The screwdriver can be used to pry the stopper out of the drain hole.

Insert the tip of the screwdriver into the gap between the stopper and the sink.
Pry the stopper out of the drain hole by twisting the screwdriver.
If the stopper is stuck, you may need to tap the screwdriver with a hammer to loosen it.

Using a Suction Cup

A suction cup can also be used to remove a stopper from a bathroom sink. The suction cup is placed on the stopper and then pulled to create a vacuum. This vacuum will help to pull the stopper out of the drain hole.

Wet the suction cup and place it on the stopper.
Pull on the suction cup to create a vacuum.
If the stopper is stuck, you may need to wiggle the suction cup back and forth.

Using a Zip Tie

A zip tie can also be used to remove a stopper from a bathroom sink. The zip tie is attached to the stopper and then pulled to tighten it around the stopper.

Insert the zip tie through the gap between the stopper and the sink.
Wrap the zip tie around the stopper and pull it tight.
Use the pliers to cut off the excess zip tie.

Using a Chemical Drain Cleaner

If you have tried all of the above methods and you are still unable to remove the stopper from your bathroom sink, you may need to use a chemical drain cleaner. The drain cleaner will help to dissolve the stopper and make it easier to remove.

Pour the drain cleaner into the drain hole.
Let the drain cleaner sit for the amount of time specified on the bottle.
Use a plunger to force the drain cleaner through the drain.
Rinse the drain with water.

Once you have successfully removed the stopper from your bathroom sink, you should clean the stopper and the drain hole. This will help to prevent clogs from forming in the drain.