Putting In A New Sink

Replacing a sink is a relatively simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can easily replace your old sink with a new one.

Step 1: Gather Your Tools and Materials

Before you begin, you will need to gather the following tools and materials:

New sink
Sink strainer
Faucet
Pliers
Wrench
Screwdriver
Plumber's putty
Caulk

Step 2: Remove the Old Sink

Turn off the water supply to the sink. Disconnect the water lines from the faucet and the drain line from the sink. Use a screwdriver to remove the mounting screws that hold the sink in place. Carefully lift the sink out of the countertop.

Step 3: Prepare the New Sink

Apply a bead of plumber's putty to the rim of the new sink. This will help to create a watertight seal between the sink and the countertop. Place the new sink in the countertop and press down firmly to seat the putty.

Step 4: Install the Faucet

Insert the faucet into the holes in the sink. Secure the faucet with the mounting nuts. Connect the water lines to the faucet.

Step 5: Connect the Drain

Insert the sink strainer into the drain hole in the sink. Secure the strainer with the mounting nut. Connect the drain line to the strainer.

Step 6: Caulk the Sink

Apply a bead of caulk around the edge of the sink where it meets the countertop. This will help to prevent water from leaking between the sink and the countertop.

Step 7: Turn on the Water Supply

Turn on the water supply to the sink. Check for leaks around the faucet, the drain, and the caulk. If you find any leaks, tighten the connections or apply more caulk as needed.

Congratulations! You have now successfully replaced your old sink with a new one.