How To Snake A Kitchen Sink Drain

A clogged kitchen sink drain is a common household problem that can be easily fixed with a little elbow grease and the right tools. If you have a plunger and a drain snake, you can clear most clogs in just a few minutes.

Step 1: Remove the standing water

Before you start snaking the drain, you need to remove as much of the standing water as possible. This will make it easier to see what you're doing and prevent water from splashing everywhere.

To remove the standing water, use a cup or bowl to scoop out as much water as you can. You can also use a wet/dry vacuum to suck up the water.

Step 2: Insert the drain snake

Once the standing water has been removed, insert the drain snake into the drain. Be careful not to push the snake in too far, as you don't want to damage the pipes.

Slowly feed the snake into the drain, rotating it as you go. This will help to loosen the clog and break it up.

Step 3: Remove the clog

Once you have reached the clog, use the snake to hook it and pull it out. Be careful not to pull too hard, as you don't want to damage the pipes.

Once the clog has been removed, run hot water down the drain to flush out any remaining debris.

Step 4: Prevent future clogs

To prevent future clogs, follow these tips: