How To Replace Pop Up Sink Stopper

A pop-up sink stopper is a convenient way to plug and unplug your sink without having to reach under the sink to turn a knob or lever. If your pop-up sink stopper is not working properly, it may be necessary to replace it. Here are the steps on how to replace a pop-up sink stopper:

1. Remove the old pop-up sink stopper. To do this, first remove the stopper cap by unscrewing it. Then, reach under the sink and locate the mounting nut that holds the pop-up stopper in place. Loosen the mounting nut and remove the pop-up stopper.

2. Clean the sink drain. Once the old pop-up sink stopper is removed, clean the sink drain to remove any debris or buildup. You can use a drain cleaner or a toothbrush to scrub the drain.

3. Install the new pop-up sink stopper. Take the new pop-up sink stopper and insert it into the sink drain. Tighten the mounting nut to secure the pop-up stopper in place.

4. Install the stopper cap. Once the pop-up sink stopper is installed, screw on the stopper cap.

5. Test the pop-up sink stopper. Once the pop-up sink stopper is installed, test it to make sure it is working properly. Fill the sink with water and plug the drain. The water should stop flowing out of the drain.

Replacing a pop-up sink stopper is a simple task that can be completed in a few minutes. By following these steps, you can easily replace your old pop-up sink stopper and get your sink working properly again.

Here are some additional tips for replacing a pop-up sink stopper:

If you are not sure how to remove the old pop-up sink stopper, you can consult your sink manufacturer's instructions.
When installing the new pop-up sink stopper, be sure to tighten the mounting nut securely. A loose mounting nut can cause the pop-up stopper to leak.
If you are having trouble getting the pop-up stopper to work properly, you may need to adjust the tension on the spring. The spring tension can be adjusted by turning the adjusting screw on the underside of the pop-up stopper.