How To Install A Stopper In A Bathroom Sink

How to Install a Stopper in a Bathroom Sink

A bathroom sink stopper is a simple but essential piece of hardware that can help keep your sink clean and prevent water from leaking out. If your sink stopper is missing or damaged, you can easily replace it yourself with a few simple tools.

Materials You'll Need

New sink stopper
Adjustable wrench
Plumber's putty

Step-by-Step Instructions

1. Remove the old stopper (if necessary): If there is an old stopper already installed, you will need to remove it before you can install the new one. To do this, simply use an adjustable wrench to loosen the nut that holds the stopper in place. Once the nut is loose, you can remove the stopper by hand.

2. Clean the drain hole: Once the old stopper is removed, you should clean the drain hole to remove any debris or dirt. You can do this by using a sponge or brush and some soapy water.

3. Apply plumber's putty: Before you install the new stopper, you need to apply a ring of plumber's putty around the base of the stopper. This will help to create a watertight seal and prevent leaks.

4. Insert the stopper: Insert the stopper into the drain hole and hand-tighten it as much as possible. Once the stopper is hand-tight, use the adjustable wrench to tighten it further. Be careful not to over-tighten the stopper, as this can damage the sink.

5. Test the stopper: Once the stopper is installed, test it by filling the sink with water and letting it drain. The stopper should effectively block the drain and prevent water from leaking out.

Tips

If you are having trouble getting the stopper to fit snugly, you can try using a little bit of petroleum jelly or silicone grease to lubricate the drain hole.
If the stopper is still leaking after you have installed it, you may need to replace the washer or gasket.
If you are not comfortable installing the stopper yourself, you can always call a plumber for help.