How To Install A Sink Faucet

Installing a sink faucet is a relatively simple plumbing task that can be completed in a few hours. By following these step-by-step instructions, you can easily replace your old faucet with a new one.

Tools and Materials You'll Need:

Adjustable wrench
Phillips screwdriver
Flathead screwdriver
Plumber's putty
Teflon tape
New faucet

Step-by-Step Instructions:

1. Turn Off the Water Supply:

Before you begin, turn off the water supply to the sink. There should be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to shut off the water.

2. Disconnect the Old Faucet:

Use an adjustable wrench to loosen the nuts that secure the water supply lines to the old faucet. Then, use a Phillips screwdriver to remove the screws that hold the faucet in place. Carefully lift the old faucet out of the sink.

3. Clean the Sink Surface:

Clean the area around the sink where the new faucet will be installed. Remove any old plumber's putty or debris.

4. Apply Plumber's Putty:

Roll out a small piece of plumber's putty into a rope and shape it into a ring. Place the putty ring around the base of the new faucet.

5. Install the New Faucet:

Insert the new faucet into the sinkhole and align it properly. Tighten the mounting nuts underneath the sink using an adjustable wrench.

6. Connect the Water Supply Lines:

Wrap a few layers of Teflon tape around the threads of the water supply lines. Then, hand-tighten the lines into the corresponding valves on the new faucet.

7. Tighten the Connections:

Use an adjustable wrench to further tighten the water supply lines and mounting nuts. Be careful not to overtighten.

8. Turn On the Water Supply:

Slowly turn on the water supply valves under the sink. Check for any leaks around the connections.

9. Test the Faucet:

Turn on the faucet and check for proper water flow and temperature. Adjust the handle as needed to achieve the desired water temperature.

Congratulations! You have successfully installed a new sink faucet. If you encounter any difficulties during the installation process, do not hesitate to consult a qualified plumber.