How To Fix Sinking Pavers

Sinking pavers can be a frustrating problem, but it is one that can be fixed relatively easily. The first step is to determine what is causing the pavers to sink. Once you know the cause, you can take the necessary steps to fix the problem and prevent it from happening again.

There are a few common causes of sinking pavers. One possibility is that the base under the pavers is not strong enough. The base should be made of compacted gravel or crushed stone, and it should be at least 4 inches thick. If the base is not strong enough, it will not be able to support the weight of the pavers, and they will eventually sink.

Another possible cause of sinking pavers is poor drainage. If water is allowed to pool around the pavers, it can weaken the base and cause the pavers to sink. To prevent this from happening, make sure that the area around the pavers is properly graded so that water can drain away.

Finally, sinking pavers can also be caused by tree roots. As tree roots grow, they can push up on the pavers and cause them to sink. If you have trees near your pavers, it is important to have them trimmed regularly to prevent this from happening.

Once you have determined the cause of the sinking pavers, you can take the necessary steps to fix the problem. If the base is not strong enough, you will need to excavate the area and replace the base with compacted gravel or crushed stone. If the drainage is poor, you will need to regrade the area so that water can drain away. And if tree roots are causing the problem, you will need to have the trees trimmed.

By following these steps, you can fix sinking pavers and prevent them from happening again. With a little effort, you can keep your pavers looking their best for years to come.