How To Fix A Leaking Sink

A leaking sink is a common household problem that can be easily fixed with a few simple steps. The following instructions will guide you through the process of repairing a leaky sink, regardless of the type of sink or faucet you have.

Before you begin, gather the following tools and materials:

Adjustable wrench
Phillips and flathead screwdrivers
Pliers
Replacement washer (if necessary)
Plumber's putty
Teflon tape

Once you have gathered your tools and materials, follow these steps to fix a leaking sink:

Turn off the water supply to the sink. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.
Open the faucet. This will release any remaining water in the faucet and lines.
Locate the source of the leak. The leak is most likely coming from one of three places: the faucet, the drain, or the pipes. If the leak is coming from the faucet, it is likely due to a worn-out washer or O-ring. If the leak is coming from the drain, it is likely due to a loose or missing washer. If the leak is coming from the pipes, it is likely due to a loose connection or a damaged pipe.
Repair the leak. If the leak is coming from the faucet, you will need to replace the washer or O-ring. If the leak is coming from the drain, you will need to tighten or replace the washer. If the leak is coming from the pipes, you will need to tighten the connection or repair the damaged pipe.
Turn on the water supply to the sink. Once you have repaired the leak, turn on the water supply to the sink and check for any leaks. If there are no leaks, your sink is now fixed.

Here are some additional tips for fixing a leaking sink:

If you are not comfortable repairing the leak yourself, call a plumber.
If the leak is coming from the pipes, do not attempt to repair it yourself. Call a plumber to avoid further damage.
If you have a two-handle faucet, you may need to replace both washers to stop the leak.
If you have a single-handle faucet, you may need to replace the cartridge to stop the leak.
If you are replacing a washer, make sure to use the correct size washer. The wrong size washer will not stop the leak.
If you are using plumber's putty, apply it liberally to the base of the faucet or drain.
If you are using Teflon tape, wrap it around the threads of the pipe or fitting in a clockwise direction.

With these simple steps, you can easily fix a leaking sink and save yourself the cost of calling a plumber.