How To Change A Kitchen Sink

Changing a kitchen sink is an important task that can be completed in a few hours. It's important to have the right tools and materials for the job, and to follow the steps carefully. Here are the steps on how to change a kitchen sink:

1. Gather materials

Gather the following materials before you begin:

New kitchen sink
New faucet
Plumber's putty
Teflon tape
Channel Lock pliers
Adjustable wrench
Bucket
Screwdriver
Caulk gun
Caulk

2. Turn off the water supply

Locate the water supply valves under the sink and turn them off. Open the faucet to release any remaining water in the lines.

3. Disconnect the water lines

Use the Channel Lock pliers to loosen the nuts that connect the water lines to the faucet. Be careful not to damage the lines.

4. Remove the old sink

Once the water lines are disconnected, you can remove the old sink. Carefully lift the sink out of the countertop and place it in the bucket. Clean the countertop thoroughly to remove any debris.

5. Install the new sink

Apply a bead of plumber's putty around the rim of the new sink. Carefully place the sink in the hole in the countertop and press down firmly to create a seal. Wipe away any excess putty.

6. Connect the water lines

Wrap the threads of the water lines with Teflon tape. Connect the water lines to the faucet and tighten the nuts with the Channel Lock pliers. Turn on the water supply and check for leaks.