Garbage Disposal Not Working And Sink Not Draining

A garbage disposal is a convenient appliance that can help to keep your kitchen clean and free of food waste. However, when your garbage disposal is not working and your sink is not draining, it can be a major inconvenience. Fortunately, there are a few simple things you can try to troubleshoot the problem and get your garbage disposal and sink working again.

First, check to make sure that the power to your garbage disposal is turned on. The switch may be located under the sink or on the wall near the sink. If the power is on, then the next step is to check the reset button on the garbage disposal. The reset button is usually located on the bottom of the disposal, and it may be red or black. Press the reset button and see if that solves the problem.

If the power is on and the reset button has been pressed, then the next step is to check for clogs. Clogs can occur in the garbage disposal itself, in the drainpipe, or in the sink. To check for a clog in the garbage disposal, use a flashlight to look inside the disposal. If you see any large pieces of food or other debris, remove them and see if that solves the problem.

To check for a clog in the drainpipe, remove the P-trap under the sink. The P-trap is the curved section of pipe that is located directly below the drain. If there is a clog in the drainpipe, it will be visible once you remove the P-trap. Remove the clog and then reassemble the P-trap.

To check for a clog in the sink, remove the stopper from the drain. If there is a clog in the sink, it will be visible once you remove the stopper. Remove the clog and then replace the stopper.

If you have checked for clogs and the garbage disposal and sink are still not working, then the next step is to call a plumber. A plumber will be able to diagnose the problem and repair it quickly and efficiently.

Here are some additional tips for preventing garbage disposal and sink clogs: