Fix Crack In Ceramic Sink

A cracked ceramic sink is a common problem that can be frustrating to deal with. The good news is that it is possible to fix a crack in a ceramic sink, and it is not as difficult as you might think. With the right tools and materials, you can have your sink looking like new again in no time.

Here are the steps on how to fix a crack in a ceramic sink:

Gather your materials. You will need the following materials to fix a crack in a ceramic sink:
- Epoxy resin
- Hardener
- Mixing bowl
- Mixing stick
- Putty knife or plastic scraper
- Sandpaper
- Cloth or sponge
- Water
Clean the area around the crack. Use a cloth or sponge to clean the area around the crack with water. Make sure to remove any dirt or debris that could interfere with the epoxy's adhesion.
Mix the epoxy resin and hardener. Follow the instructions on the epoxy package to mix the resin and hardener. Be sure to mix the epoxy thoroughly until it is a uniform color.
Apply the epoxy to the crack. Use a putty knife or plastic scraper to apply the epoxy to the crack. Be sure to fill the crack completely and smooth the epoxy over the surface of the sink.
Allow the epoxy to cure. Allow the epoxy to cure according to the instructions on the package. This will typically take several hours or overnight.
Sand the epoxy. Once the epoxy has cured, sand it smooth with sandpaper. Start with a coarse sandpaper and gradually work your way to a finer sandpaper until the epoxy is flush with the surface of the sink.
Clean the sink. Use a cloth or sponge to clean the sink with water. Remove any dust or debris that was created by sanding.

Tips:

If the crack is large, you may need to use a filler to fill the crack before applying the epoxy.
If the crack is located near the drain, be sure to use a waterproof epoxy.
If you are not comfortable fixing the crack yourself, you can hire a professional to do it for you.