Removing Undermount Sink From Granite

Removing an undermount sink from granite can be a challenging task, but it is possible with the right tools and materials. Here are the steps on how to do it:

1. Gather Your Tools and Materials

Before you start, gather the following tools and materials:

Safety goggles
Work gloves
Putty knife
Razor blade
Caulk remover
Sponge
Bucket of water
Towels

2. Prepare the Sink

Turn off the water supply to the sink and disconnect the water lines. Remove the drain stopper and any other fixtures. Place a towel around the sink to protect the countertop from scratches.

3. Cut the Caulk

Use a razor blade to score the caulk around the sink. Be careful not to cut into the granite.

4. Loosen the Sink

Insert a putty knife between the sink and the granite. Gently pry the sink loose. Be patient and work your way around the entire sink.

5. Remove the Sink

Once the sink is loose, carefully lift it out of the hole. Be careful not to damage the granite.

6. Clean the Area

Use a sponge and caulk remover to clean the area where the sink was located. Remove any remaining caulk or sealant.

7. Dry the Area

Use a towel to dry the area thoroughly.

8. Reinstall the Sink (Optional)

If you are reinstalling the same sink, you can follow the steps in reverse order to install it. Be sure to apply a new bead of caulk around the sink before setting it in place.

Tips

Be patient and take your time. Rushing the process can lead to mistakes.
Use a sharp razor blade to cut the caulk. A dull blade will make the job more difficult.
Be careful not to cut into the granite when removing the sink.
If you have any questions, consult with a professional.