1 1 4 Sink Drain Pipe - Sink Remodels

## 1 1/4 Sink Drain Pipe

A 1 1/4 sink drain pipe is a type of plumbing pipe that is used to connect a sink to a drain. It is typically made of PVC plastic and has a diameter of 1 1/4 inches. Sink drain pipes are available in different lengths and can be cut to the desired size. They are also available with different types of fittings, such as elbows and tees, to accommodate different plumbing configurations.

When installing a 1 1/4 sink drain pipe, it is important to use a sealant to create a watertight connection. The sealant should be applied to the inside of the pipe and to the outside of the fitting. The pipe should then be tightened into the fitting until it is snug. Once the pipe is installed, it should be tested for leaks.

1 1/4 sink drain pipes are a common type of plumbing pipe that is used in both residential and commercial applications. They are relatively easy to install and can be used to create a variety of different plumbing configurations.

### Types of 1 1/4 Sink Drain Pipes

There are two main types of 1 1/4 sink drain pipes: corrugated and non-corrugated. Corrugated pipes are made of a flexible plastic material and have a ribbed surface. Non-corrugated pipes are made of a rigid plastic material and have a smooth surface.

Corrugated pipes are more flexible than non-corrugated pipes, which makes them easier to install in tight spaces. However, corrugated pipes are also more likely to leak than non-corrugated pipes. Non-corrugated pipes are more durable than corrugated pipes and are less likely to leak. However, non-corrugated pipes are also more difficult to install.

The type of 1 1/4 sink drain pipe that you choose will depend on the specific needs of your plumbing project.

### Fittings for 1 1/4 Sink Drain Pipes

There are a variety of different fittings that can be used with 1 1/4 sink drain pipes. These fittings include elbows, tees, and adapters. Elbows are used to change the direction of a pipe, tees are used to connect three pipes together, and adapters are used to connect pipes of different diameters.

When choosing fittings for 1 1/4 sink drain pipes, it is important to use the correct size and type of fitting. The fitting should be the same diameter as the pipe and should be made of the same material. It is also important to use a sealant to create a watertight connection between the pipe and the fitting.

### Installation of 1 1/4 Sink Drain Pipes

The installation of 1 1/4 sink drain pipes is a relatively simple process. However, it is important to follow the manufacturer's instructions carefully.

To install a 1 1/4 sink drain pipe, you will need the following tools and materials:

1 1/4 sink drain pipe
Fittings
Sealant
Pipe wrench
Hacksaw

Once you have gathered the necessary tools and materials, you can begin the installation process.

Cut the sink drain pipe to the desired length using a hacksaw.
Apply sealant to the inside of the pipe and to the outside of the fitting.
Tighten the pipe into the fitting until it is snug.
Repeat steps 2 and 3 for each fitting that you are using.
Once all of the fittings are installed, test the pipe for leaks.

If you are not comfortable installing 1 1/4 sink drain pipes yourself, you can hire a plumber to do the job for you.

### Maintenance of 1 1/4 Sink Drain Pipes

1 1/4 sink drain pipes require very little maintenance. However, it is important to inspect them regularly for leaks. If you notice a leak, you should tighten the fitting or replace the pipe.

You should also clean the sink drain pipes regularly to prevent clogs. To clean the pipes, you can use a drain cleaner or a mixture of baking soda and vinegar.

By following these simple maintenance tips, you can keep your 1 1/4 sink drain pipes in good working condition for many years to come.