How To Fix A Bathroom Sink Stopper

It can be frustrating when your bathroom sink stopper isn't working properly. It is a common problem with an easy solution in most cases. The following steps will help you fix your bathroom sink stopper so you can get back to using your sink as usual.

First, you need to determine what type of stopper you have. There are two main types of stoppers: lift-and-turn stoppers and pop-up stoppers. Lift-and-turn stoppers are the most common type. They have a knob or lever that you lift and turn to open or close the stopper. Pop-up stoppers are less common. They have a button that you press to open or close the stopper. Once you know what type of stopper you have, you can follow the steps below to fix it.

Lift-and-Turn Stopper

1. Remove the stopper. To do this, simply lift the stopper up and turn it counterclockwise. 2. Check the washer. The washer is a rubber or plastic ring that sits around the base of the stopper. If the washer is worn or damaged, it will need to be replaced. 3. Clean the stopper and the drain. Use a mild cleaner and a sponge to clean the stopper and the drain. Be sure to remove any hair or debris that may be clogging the drain.

Reassemble the stopper. To do this, simply insert the stopper into the drain and turn it clockwise until it is tight.

Pop-Up Stopper

1. Remove the stopper. To do this, simply press down on the top of the stopper and pull it up. 2. Check the linkage. The linkage is a metal rod that connects the stopper to the drain. If the linkage is bent or damaged, it will need to be replaced. 3. Clean the stopper and the drain. Use a mild cleaner and a sponge to clean the stopper and the drain. Be sure to remove any hair or debris that may be clogging the drain.

Reassemble the stopper. To do this, simply insert the stopper into the drain and push down on the top of the stopper until it is in place.

If you have followed the steps above and your bathroom sink stopper is still not working properly, you may need to call a plumber. A plumber can diagnose the problem and make the necessary repairs.