How To Clean Drain Trap In Sink

If you're noticing a slow drain in your sink, chances are the drain trap is clogged. The drain trap is a U-shaped pipe that's located under the sink. It's designed to trap debris and prevent it from entering the drainpipe. Over time, the drain trap can become clogged with hair, soap scum, and other debris, which can slow down the flow of water.

Cleaning the drain trap is a relatively simple task that can be done in a few minutes. Here's how to do it:

Gather your materials. You will need a bucket, a wrench, and a pair of pliers.
Place the bucket under the drain trap. This will catch the water that drains out when you remove the trap.
Loosen the nuts that hold the drain trap in place. Use the wrench to loosen the nuts, but do not remove them completely.
Carefully remove the drain trap. Be careful not to spill any water.
Clean the drain trap. Remove any debris from the drain trap. You can use a brush or a pair of pliers to remove the debris.
Reinstall the drain trap. Tighten the nuts that hold the drain trap in place. Do not overtighten the nuts.
Test the drain. Run water down the drain to make sure that it is draining properly.

If the drain is still slow after cleaning the trap, there may be a clog further down the drainpipe. You may need to call a plumber to have the drainpipe cleaned.

Here are some additional tips for preventing drain clogs:

Use a drain strainer to catch hair and other debris.
Run hot water down the drain regularly to help dissolve soap scum and other buildup.
Avoid pouring grease or oil down the drain.
If you have a garbage disposal, run it regularly to help grind up food scraps.

By following these tips, you can help keep your drains clog-free.