Kitchen Sink Spray Head Replacement

A kitchen sink spray head is an essential part of any kitchen sink, providing a convenient way to rinse dishes, clean the sink, and perform other tasks. Over time, however, spray heads can become clogged, leaky, or damaged, requiring replacement. Replacing a kitchen sink spray head is a relatively simple and inexpensive task that can be completed in a few minutes with the right tools and materials.

Tools and Materials You'll Need

New kitchen sink spray head
Adjustable wrench
Plumber's putty
Rags or towels

Steps for Replacing a Kitchen Sink Spray Head

Turn off the water supply. Locate the water supply valves under the sink and turn them off. This will prevent water from spraying out when you disconnect the old spray head.
Disconnect the water supply hose. Use an adjustable wrench to loosen the nut that connects the water supply hose to the old spray head. Be careful not to overtighten the nut, as this could damage the hose.
Remove the old spray head. Unscrew the old spray head from the sink by turning it counterclockwise. Be careful not to drop the spray head into the sink, as this could damage it.
Apply plumber's putty to the new spray head. Apply a thin layer of plumber's putty to the threads of the new spray head. This will help to create a watertight seal between the spray head and the sink.
Screw the new spray head into the sink. Thread the new spray head into the sink by turning it clockwise. Tighten the spray head until it is snug, but be careful not to overtighten it, as this could damage the spray head or the sink.
Reconnect the water supply hose. Connect the water supply hose to the new spray head by tightening the nut with an adjustable wrench. Be careful not to overtighten the nut, as this could damage the hose.
Turn on the water supply. Turn on the water supply valves under the sink and check for leaks. If you see any leaks, tighten the nuts on the water supply hose or the spray head until the leaks stop.

Replacing a kitchen sink spray head is a simple and inexpensive task that can be completed in a few minutes with the right tools and materials. By following these steps, you can easily replace your old spray head and get your kitchen sink back in working order.