Putting In A Kitchen Sink

You probably turn on your faucet and never give much thought to the kitchen sink until it acts up. That is, until it gets clogged or starts leaking and you realize you need to replace it. Replacing a kitchen sink is a job that most do-it-yourselfers can tackle in a weekend. Here's how to do it.

Before you start, turn off the water supply to the sink. You'll find the shut-off valves under the sink. Once the water is off, disconnect the water supply lines from the faucet. You may need to use a wrench to loosen the nuts that hold the lines in place.

Next, you need to remove the old sink. If it's a drop-in sink, it should just lift out of the countertop. If it's an undermount sink, you'll need to detach it from the countertop. To do this, you'll need to remove the clips or screws that hold the sink in place. Once the sink is detached, you can lift it out of the countertop.

Now it's time to install the new sink. If you're installing a drop-in sink, simply set it in place on the countertop. If you're installing an undermount sink, you'll need to first apply a bead of silicone caulk around the edge of the countertop. Then, set the sink in place and press it down firmly. Wipe away any excess caulk.

Once the sink is in place, you need to reconnect the water supply lines. To do this, simply screw the nuts back onto the water supply valves. Be sure to tighten the nuts securely, but don't overtighten them.

Finally, turn on the water supply and check for leaks. If you see any leaks, tighten the nuts on the water supply lines until the leaks stop.

That's it! You've now successfully replaced your kitchen sink.