How To Remove Sink Faucet

It may seem like a daunting task, but removing a sink faucet is actually quite simple. With the right tools and a little bit of know-how, you can have your new faucet installed in no time.

Here's a step-by-step guide on how to remove a sink faucet:

1. Turn off the water supply.

The first step is to turn off the water supply to your sink. There are usually two shut-off valves located under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.

2. Disconnect the water supply lines.

Once the water supply is turned off, you can disconnect the water supply lines from the faucet. There are usually two nuts that hold the lines in place. Use a wrench to loosen the nuts and then disconnect the lines.

3. Remove the faucet mounting nuts.

Under the sink, you will see two nuts that hold the faucet in place. Use a wrench to loosen these nuts and then remove them.

4. Pull the faucet out of the sink.

Once the mounting nuts are removed, you can pull the faucet out of the sink. Be careful not to damage the sink or the faucet.

5. Clean the sink and faucet.

Before installing the new faucet, it's a good idea to clean the sink and the faucet. This will help to ensure a proper seal and prevent leaks.

6. Install the new faucet.

To install the new faucet, simply reverse the steps above. First, insert the new faucet into the sink. Then, tighten the mounting nuts and connect the water supply lines. Finally, turn on the water supply and check for leaks.

Here are some additional tips for removing a sink faucet:

Use a flashlight to help you see under the sink.

If the nuts are corroded, you may need to use a penetrating oil to loosen them.

Be careful not to overtighten the nuts.

If you are not comfortable removing the faucet yourself, you can call a plumber for assistance.