1 1 4 Sink Tailpiece

1 1/4 Sink Tailpiece

A 1 1/4 sink tailpiece is a plumbing fitting that connects the sink drain to the drainpipe. It is typically made of brass or plastic and has a diameter of 1 1/4 inches. The tailpiece is connected to the sink drain by a slip joint, which allows it to be easily removed for cleaning or repairs.

There are two main types of 1 1/4 sink tailpieces: regular and extended. Regular tailpieces are typically 6 inches long, while extended tailpieces are 12 inches long. Extended tailpieces are used when the drainpipe is located further away from the sink.

When choosing a 1 1/4 sink tailpiece, it is important to consider the following factors:

• The diameter of the sink drain
• The distance between the sink drain and the drainpipe
• The type of material the tailpiece is made of

Once you have chosen a tailpiece, you can install it by following these steps:

1. Place the tailpiece over the sink drain.
2. Tighten the slip joint nut by hand.
3. Use a wrench to tighten the nut further, but do not overtighten.
4. Connect the other end of the tailpiece to the drainpipe.
5. Test the tailpiece for leaks by running water into the sink.

If you are experiencing problems with your 1 1/4 sink tailpiece, there are a few things you can do to troubleshoot the problem:

• Check for leaks around the slip joint nut.
• If the tailpiece is clogged, you can try to unclog it by using a drain snake.
• If the tailpiece is damaged, you will need to replace it.

By following these tips, you can choose, install, and troubleshoot a 1 1/4 sink tailpiece.

Additional Tips

Here are a few additional tips for choosing and installing a 1 1/4 sink tailpiece:

• If you are not sure what size tailpiece you need, you can measure the diameter of the sink drain.
• If you are installing a new sink, it is a good idea to replace the tailpiece at the same time.
• When tightening the slip joint nut, be careful not to overtighten, as this can damage the tailpiece.
• If you are experiencing leaks around the slip joint nut, you can try to tighten the nut further or replace the washer.
• If you are unable to unclog the tailpiece with a drain snake, you may need to call a plumber.

By following these tips, you can ensure that your 1 1/4 sink tailpiece is installed correctly and is working properly.

Plumbflex 1 4 In X 12 Brass Flanged Tailpiece For Tubular Drain S 22ga Chrome Plated 21126

Oatey 1 2 In X 8 4 Plastic Slip Joint Sink Drain Tailpiece With High Line Branch Hdc9818

Oatey 1 2 In X 8 4 Plastic Slip Joint Sink Drain Tailpiece With High Line Branch Hdc9818

Form N Fit 1 2 In X 11 4 White Plastic Slip Joint Sink Drain Tailpiece

1 4 X 12 Chrome Plated Tailpiece Threaded On Both Ends 17 Ga Noel S Plumbing Supply

Oatey 1 2 In X 8 4 Plastic Slip Joint Sink Drain Tailpiece With High Line Branch Hdc9818

Oatey 1 4 In X 6 White Plastic Slip Joint Sink Drain Extension Tube Hdc9790bg The Home

Traditional Sink Drain 1 4 P Trap Rejuvenation

Sink Drain For Bathroom Pop Up Fits 1 2 Opening With A 4 Tai Heatgene

Tailpiece Under Sink Plumbing At Com